RIPv2 and RIPng - Foundation Summary

6 important questions on RIPv2 and RIPng - Foundation Summary

What is the command mode and description of passive-interface [default] {interface-type interface-number}?

RIP config mode

Causes RIP to stop sending updates ont the specified interface.

What is the command mode and description of accept-lifetime [start-time {infinite | end-time | duration seconds}]?

Key config mode; defines when the key is valid to be used for recieved updates.

What is the command mode and description of  poison-reverse?

RIPng config mode, activates Split Horizon with Poisended Reverse. If both split-horizon and poison-reverse are configured, poison-reverse takes precedence.
  • Higher grades + faster learning
  • Never study anything twice
  • 100% sure, 100% understanding
Discover Study Smart

What is the command mode and description of port port multicast-group group?

RIPng config mode;defines the UDP port and multicast address to send and listen for RIPng packets. Used if multiple processes are to communicate over a single interface, as multiple processes cannot listen on the same UDP port.

What is the command mode and description of ipv6 rip word metric-offset offset?

Interface mode, defines the offset by which the metric in recieved RIPng updates is incremented.

What is the command mode and description of ipv6 rip word summary-address ipv6-prefix/prefix-length?

Interface mode; defines manual prefix summarization

The question on the page originate from the summary of the following study material:

  • A unique study and practice tool
  • Never study anything twice again
  • Get the grades you hope for
  • 100% sure, 100% understanding
Remember faster, study better. Scientifically proven.
Trustpilot Logo